linHES and Shepherd XMLTV listing grabber

Over the weekend I built a new mythtv box. My old box (Dell GX260) has been in service for about 3.5 years and has been very good but its getting old and times are moving on, its hardware is starting to get left behind.

With the new release of Mythtv v0.22 due later this month and the recent release of VDPAU by Nvidia I thought it time to build a new box and take advantage of these new features.

Having bought a used Dell GX620 for AU180 I threw in a new Leadtech 8400GS GPU (low profile), 1TB HDD and a used Dvico Dual digital 4 TV Capture card.

I have to this point only ever used Mythdora which has been great and am currently running 10.21 (after running 3.01 for 3 years). This time around I wanted something that was easy to upgrade and keep up to date, easy to install and was stable – enter linHES. linHES is the ‘new’ knopmyth but is now based on Arch linux. I have been using Arch on my laptop since Christmas so have a fair amount of experience with the distro so it seems to be a perfect fit for me.

Installation of linHES was painless and the Dual digital card was working fine (its a version 1) although for some odd reason on the first installation ( I have since done a few) the first time I tried to add the second DVB tuner on the card it wouldn’t work, every installation since then has worked fine which seems odd.

Prior to setting up the cards I made sure I had the mythtv package that had VDPAU prebuilt. to do this I just passed pacman -S mythtv-vdpau and off it went.

My previous mythboxes have used the fantastic script to get the TV listings called Shepherd. Shepherd has some perl dependencies that need to be installed prior to running the Sheperd config. I found a few of them were packages prebuilt to be installed using pacman but one remainied elusive and was a requirements to run shepherd, it was called ‘Compress::Zlib’. I ended up getting it by installing perl pacman -S perl and finally was able to run Shepherd.

Just now I realise I could have installed shepherd and all its dependencies with a simple pacman -S shepherd. I’m such a idiot. I recall seeing shepherd in the repo the other day when I was having a poke around and thought it must be something else. I’m a glutton for punishment.

Will do a fresh install tonight after university and install it into the main TV room this weekend for full time use.

Leave a Reply

Your email address will not be published. Required fields are marked *